Chucks

Independent (Dog) Chucks (4 jaws )

Body: Semi Steel From High Strength Cast Iron & Ground All Over
Jaws: Case Hardened & Precision Ground At Gripping Faces & Jaws Ways
Operating Screw: Case Hardened Alloy Steel For Strength & Wear Resistance
Thrust Bearing : Case Hardened Alloy Steel To Provide Maximum Strength To Working Parts Provides Higher Grip With Reasonable Torque Provided With Four Bolts & Chuck Oprerating Key

CAT. NO. NOMINAL SIZE d1 d2
mm
d3
mm
H
mm
APROX
WEIGHT (Kgs.)

INCHES mm

SIC - 8 8 200 95 51 88 16.5

SIC - 10 10 250 125 64 88 22.5

SIC - 12 12 300 160 76 102 37.5

SIC - 14 14 350 160 89 102 46

SIC - 16 16 400 190 102 102 72

SIC - 18 18 450 190 115 105 80

SIC - 20 20 500 225 127 115 103

SIC - 24 24 600 254 152 140 180

Quantity

Self Centring (True) Chucks (3 Jaws)

Scroll Operated Chuck With 2 Sets Of Jaws (Reverse & Forward)
Body : High Strength Cast Iron Alloyed With Magnese & Chrome

Scroll : Forged High Strength Wear Resistant Alloy Steel Hardness 40/45 HRC

Jaws : Case Hardened Steel With Tough Core 56/50 HRC

Pinion: Case Hardened & Ground Bearing Areas

STD.Accuracy : Within 0.015mm

Also Available In 4 Jaws & 6 Jaws Configuration

CAT. NO.	NOMINAL SIZE d1	d2	P. C. D		d4	H	APROX WEIGHT (Kgs.)
CAT. NO.	mm	mm	d3 mm	TOL. ON d3	mm	mm	APROX WEIGHT (Kgs.)
SCC - 5	125	95	108	� 0.3	28.5	63.5	5.5
SCC - 6	165	125	140	� 0.3	41	73.5	10.5
SCC - 8	200	160	176	� 0.3	55	78	15
SCC - 10	250	200	224	� 0.4	76	85	26
SCC - 12	315	267	292	� 0.5	95	90	38
SCC - 16	400	318	356	� 0.5	114	108	90

Quantity

D1 Chuck Adapter Plates

* Semi Machined With D1 Camlock Fixing
* Supplied Complete With Camlock Studs And Retaining Screws

CAT. NO.	PLATE DIA. mm	SPINDLE NOSE
CAP - 64	160	D1 - 4
CAP - 84	200	D1 - 4
CAP - 86	200	D1 - 6
CAP - 88	200	D1 - 8
CAP - 104	250	D1 - 4
CAP - 106	250	D1 - 6
CAP - 108	250	D1 - 8
CAP - 111	250	D1 - 11
CAP - 126	315	D1 - 6
CAP - 128	315	D1 - 8
CAP - 121	315	D1 - 11

Quantity

Lathe Chuck keys

* Manufactured From Carbon Steel
* Hardened & Tempered With Sliding Handle

CAT. NO.		SQUARE SIZE
INCHES	mm	INCHES	mm
SLK - 51A	SLK - 52A	¹/₄	6
SLK - 51B	SLK - 52B	⁵/₁₆	8
SLK - 51C	SLK - 52C	³/₈	9
SLK - 51D	SLK - 52D	⁷/₁₆	10
SLK - 51E	SLK - 52E	¹/₂	12
SLK - 51F	SLK - 52F	⁹/₁₆	14
SLK - 51G	SLK - 52G	⁵/₈	16
SLK - 51H	SLK - 52H	¹¹/₁₆	17
SLK - 51I	SLK - 52I	³/₄	19

Quantity

Pin Chucks

* For Holding Small Drills In Drilling Machines
* Supplied Complete With Three Interchangeable Precision Collets
* Knurled Body Has 2.1/2" (63mm) Overall Length

CAT. NO.	COLLET CAPACITY
CAT. NO.	INCHES	mm
SPC - 86S	0 TO ¹/₃₂	0 TO 0.80
	¹/₃₂ TO¹/₁₆	0.80 TO 1.50
	¹/₁₆TO³/₃₂	1.50 TO 2.40

Quantity