Tool Holders

Turning Tool Holders (American Type)

* Made From High Grade Steel
* Case Hardened & Ground
* Supplied With One Wrench But Without Toolbit
* Available In Straight Shank (ST), Right (RT) & Left (LT)Hand Shank

CAT. NO.			SHANK SIZE Width x Height		OVERALL LENGTH		SQUARE TOOL BIT CAPACITY
STRAIGHT	LEFT	RIGHT	INCHES	mm	INCHES	mm	INCHES	mm
SATH-BOS	SATH-BOL	SATH-BOR	⁵/₁₆x³/₄	8 x 19	4¹/₂	114	³/₁₆	4.7
SATH-COS	SATH-COL	SATH-COR	³/₈x⁷/₈	9.5 x 22	5	157	¹/₄	6.3
SATH-DOS	SATH-DOL	SATH-DOR	¹/₂x1¹/₈	12.7 x 28	6	152	⁵/₁₆	8
SATH-EOS	SATH-EOL	SATH-EOR	⁵/₈x1³/₈	16 x 35	7	178	³/₈	9.5
SATH-GOS	SATH-GOL	SATH-GOR	⁷/₈x1³/₄	22 x 44	9	228	¹/₂	12.7
SATH-HOS	SATH-HOL	SATH-HOR	¹⁵/₁₆x1¹/₄	23.8 x 47.6	10	254	⁵/₈	15.8

Quantity

Turning Tool Holders (English Type)

* Made From High Grade Steel
* Case Hardened & Ground
* Supplied With One Wrench But Without Toolbit
* Available In Straight Shank (ST), Right (RT) & Left (LT)Hand Shank

CAT. NO.	SHANK SIZE		OVERALL LENGTH		SQUARE TOOL BIT CAPACITY
CAT. NO.	INCHES	mm	INCHES	mm	INCHES	mm
STH-31B	¹/₂x⁹/₁₆	12.7 x 14.3	4¹/₂	114	³/₁₆	4.7
STH-31C	⁵/₈x³/₄	16 x 19	7¹/₂	190	¹/₄	6.3
STH-31D	³/₄x⁷/₈	19 x 22	8¹/₂	216	⁵/₁₆	8
STH-31E	⁷/₈x1	22 x 25.4	9¹/₂	241	³/₈	9.5
STH-31G	1¹/₈ x 1¹/₄	28 x 32	11¹/₂	292	¹/₂	12.7
STH-31H	1¹/₄ x 1³/₈	32 x 35	12¹/₂	317	⁵/₈	15.8

Quantity

Tool Holders -UNIVERSAL

* Made From High Grade Steel , Fully Hardened
* For Holding Square Tools In Three Different Directions
* Supplied Complete With Allen Bolts & Key

CAT. NO.	CAPACITY (SQUARE TOOL)		HOLDER SIZE L x W x H
CAT. NO.	INCHES	mm	mm
UTH-14	¹/₄	6	110 x 12 x 16
UTH-38	³/₈	9.5	120 x 14 x 18
UTH-12	¹/₂	12.7	145 x 18 x 20
UTH-58	⁵/₈	16	175 x 20 x 25
UTH-34	³/₄	19	250 x 25 x 32

Quantity

Tool Bit Holders

* All Faces Are Machined And Ground
* Holds Tool Bit Securely & Rigidly
* For Use On English Type Lathes With Flat Tool Rests Or 4-Way Turret Tool Posts
* Supplied With Allen Key,But,Without Tool Bit

CAT. NO.	SHAPE	SHANK SIZE Width x Height		OVERALL LENGTH		SQUARE TOOL BIT CAPACITY
CAT. NO.	SHAPE	INCHES	mm	INCHES	mm	INCHES	mm
SBH-523	STRAIGHT	⁹/₁₆ x³¹/₃₂	14x24	5	127	³/₁₆ To¹/₄	4.7 To 6.3
SBH-522	LEFT	⁹/₁₆ x¹³/₁₆	14x20	5	127	³/₁₆ To¹/₄	4.7 To 6.3
SBH-521	RIGHT	⁹/₁₆ x¹³/₁₆	14x20	5	127	³/₁₆ To¹/₄	4.7 To 6.3
SBH-533	STRAIGHT	⁵/₈ x 1¹/₁₆	16 x 27	6	152	⁵/₁₆ To³/₈	8 To 9.5
SBH-532	LEFT	⁵/₈ x³¹/₃₂	16 x 24	6	152	⁵/₁₆ To³/₈	8 To 9.5
SBH-531	RIGHT	⁵/₈ x³¹/₃₂	16 x 24	6	152	⁵/₁₆ To³/₈	8 To 9.5
SBH-543	STRAIGHT	¹⁹/₃₂ x⁷/₈	15 x 22	5¹/₂	140	¹/₄ To⁵/₁₆	6.3 To 8
SBH-542	LEFT	⁹/₁₆ x⁷/₈	14 x 22	5¹/₂	140	¹/₄ To⁵/₁₆	6.3 To 8
SBH-541	RIGHT	⁹/₁₆ x⁷/₈	14 x 22	5¹/₂	140	¹/₄ To⁵/₁₆	6.3 To 8
SBH-553	STRAIGHT	²³/₃₂ x 1³/₁₆	18 x 30	8	203	³/₈ To¹/₂	9.5 To 12.7
SBH-552	LEFT	²³/₃₂ x 1¹/₆	18 x 27	8	203	³/₈ To¹/₂	9.5 To 12.7
SBH-551	RIGHT	²³/₃₂ x 1¹/₆	18 x 27	8	203	³/₈ To¹/₂	9.5 To 12.7

Quantity

Boring Tool Holders

* Provides Rigid Support To The Bar Or Tool While Boring, Drilling Or Reaming Operations
* Holders Machined And Fully Hardened
* Supplied With Allen Bolts And Wrench But Without Boring Bars
* Black Oxidized Finish

CAT. NO.	S H A N K S I Z E Width x Height		OVERALL LENGTH		BAR CAPACITY (DIA.) �		FOR LATHES APROX. SWING
CAT. NO.	INCHES	mm	INCHES	mm	INCHES	mm	INCHES
BTH-20	⁵/₁₆ x ³/₄	8 x 19	4⁷/₈	124	³/₁₆ To ¹/₂	5 To 12	6 To 8
BTH-21	³/₈ x ⁷/₈	9.5 x 22	5³/₈	136	¹/₄ To ⁹/₁₆	6 To 14	9 To 10
BTH-22	¹/₂ x 1¹/₈	12.7 x 28	6¹/₈	155	⁵/₁₆ To ³/₄	8 To 20	11 To 14
BTH-23	⁵/₈ x 1³/₈	16 x 35	7⁷/₁₆	189	³/₈ To ¹⁵/₁₆	9 To 24	14 To 16

Quantity

Planar And Shaper Tool

* Forged Steel One Piece Body
* Quick Adjustment For Planing Or Shaping Either Straight, Right Or Left Hand
* The Grooved Seat Holds The Bit Firmly
* Complete With Wrench But Without Tool Bit

CAT. NO.	SHANK SIZE Width x Height		OVERALL LENGTH		CAPACITY TO HOLD TOOL BIT INCHES
CAT. NO.	INCHES	mm	INCHES	mm	Thickness x Width
SP-128	¹/₂ x 1	13 x 25	7	178	¹/₄ x¹/₄To³/₈
SP-129	⁵/₈ x 1¹/₄	16 x 32	8¹/₂	216	⁵/₁₆ x⁵/₁₆To¹/₂
SP-130	³/₄ x 1¹/₂	19 x 38	10	254	³/₈ x³/₈To⁵/₈
SP-131	1¹/₈ x 1³/₄	28 x 44	13	330	¹/₂ x¹/₂To³/₄

Quantity

Parting Off & Side Tool Holders

* Case Hardened & Ground
* Positive Locking Of The Blades Ensures Longer Life Of Blade Held
* Supplied With Wrench ,But Without Parting Off Blade
* Available In ST, RT, & LT Hand Shape

CAT. NO.	SHANK SIZE Width x Height		OVERALL LENGTH		BLADE HOLDING CAPACITY
CAT. NO.	INCHES	mm	INCHES	mm	INCHES	mm
SCH-32A	³/₈x⁷/₈	9.5 x 22	5	127	³/₃₂x¹/₂	2.3 x 12.7
SCH-32B	³/₈x³¹/₃₂	9.5 x 24	5	140	³/₃₂x⁵/₈	2.3 x 15.8
SCH-32C	¹/₂x1³/₁₆	12.7 x 30	6	152	¹/₈x³/₄	3 x 19
SCH-32D	⁵/₈x1³/₈	16 x 35	7	178	¹/₈x⁷/₈	3 x 22
SCH-32E	³/₄x1⁵/₈	19 x 41	8	203	³/₁₆x1	4.7 x 25.4
SCH-32F	⁷/₈x1³/₄	22 x 44	9	228	³/₁₆x1¹/₈	4.7 x 28.5

Quantity

Parting Tool Holders -Tee Type

* Made From Solid Steel Fully Hardened
* Unique Extra Strong Clamping Power
* Can Be Used Both On Front & Rear Tool Post Of The Crossline
* Supplied Without Parting Blade

CAT. NO.	HOLDER SIZE (mm)				BLADE HOLDING CAPACITY
CAT. NO.	LENGTH (L)	WIDTH (W)	HEIGHT (H)	DEPTH (D)	INCHES	mm
PTH - CT1	70	12.5	20	12.5	³/₃₂ x¹/₂	2.3 x 12.7
PTH - CT2	70	12.5	20	12.5	³/₃₂ x⁵/₈	2.3 x 15.8
PTH - CT3	80	15	24	17.5	¹/₈ x³/₄	3 x 19

Quantity

Cutting Off Tool Holders

* Case Hardened & Ground
* Holds Twwo Different Sizes Of Parting Off Blades Within A Certain Range
* Supplied With Allen Key,But Without Parting Off Blades

CAT. NO.	SHANK SIZE Width x Height		OVERALL LENGTH		BLADE HOLDING CAPACITY
CAT. NO.	INCHES	mm	INCHES	mm	INCHES	mm
SPH - 33AA	⁵/₁₆x ⁹/₁₆	8x14	3¹¹/₁₆	94	⁵/₁₆	8
SPH - 33A	¹/₂ x 1	12.7x25.4	6	152	³/₃₂ x ¹/₂ & ³/₃₂ x ⁵/₈	2.3 x 12.7 & 2.3 x 15.8
SPH - 33B	⁵/₈ x 1³/₈	16x35	7	178	¹/₈ x³/₄ & ¹/₈ x⁷/₈	3 x 19 & 3 x 22
SPH - 33C	³/₄ x 1¹¹/₁₆	19x43	7¹/₂	190	³/₁₆ x 1 & ³/₁₆ x 1¹/₈	4.7 x 25.4 & 4.7 x 28.5

Quantity

Knurling Tool Holders

	SKH-35H: Revolving Fork Head For Production Knurling Complete WithA Pair Of Each Medium ,Coarse And Fine Cut Knurls (Also SKH-35G)
	SHK-36E: Six Holder Gives Three Diamond Knurling Pitches By JustRevolving The Head
	SKH-35: For Use With American Type Bench Lathes With Self Centring Fork Head For Daimond Pattern Knurling (Also SKH-35B & SKH-35D)
	SKH-36B: For Use With English Type Bench Lathes With Self CentringFork Head For Daimond Pattern Knurling
	SKH-8144: Light Duty With Self Centring Fork Head For DaimondPattern Knurling
	SCT-002 : Adjustable Clamp Knurling Holder Is MOst Suitable For Small Daimeters And Tubes .Adjustment Range 1/8 "- 1"
	SKH-35A: Single Knurl Holder For Holding Straight , Checkered OR Spiral Knurl

CAT. NO.	Holder Size L x W x H	No. of Knurls fitted	CAT. NO.	Size of Knurls Dia. x Width x Bore	Pattern	Pitch
CAT. NO.	INCHES	No. of Knurls fitted	CAT. NO.	INCHES	Pattern	Pitch
SKH-35A	4 x ¹/₂x¹/₂	1	SSK-37A	³/₄ x¹/₄ x¹/₄	Straight	Medium
SKH-35B	5 x ⁵/₁₆x³/₄	2	SSK-37C	⁵/₈ x⁵/₁₆ x¹/₄	Spiral (Rt. & Lt.)	Medium
SKH-35C	5¹/₂ x ³/₈x⁷/₈	2	SSK-37C	⁵/₈ x⁵/₁₆ x¹/₄	Spiral (Rt. & Lt.)	Medium
SKH-35D	6¹/₂ x ¹/₂x 1¹/₈	2	SSK-37B	³/₄ x³/₈ x¹/₄	Spiral (Rt. & Lt.)	Medium
SKH-36B	4⁷/₈ x ⁵/₈x⁵/₈	2	SSK-37B	³/₄ x³/₈ x¹/₄	Spiral (Rt. & Lt.)	Medium
SKH-8144	5 x ¹/₂x¹/₂	2	SSK-37B	³/₄ x³/₈ x¹/₄	Spiral (Rt. & Lt.)	Medium
SCT-002	3 x ³/₈x⁵/₈	2	SSK-37B	³/₄ x³/₈ x¹/₄	Spiral (Rt. & Lt.)	Medium
SKH-35G	5¹/₂ x ³/₈x⁷/₈	6	SSK-37C	⁵/₈ x⁵/₁₆ x¹/₄	Spiral (Rt. & Lt.)	Coarse, Medium & Fine
SKH-35H	6¹/₂ x ¹/₂x1¹/₈	6	SSK-37B	³/₄ x³/₈ x¹/₄	Spiral (Rt. & Lt.)	Coarse, Medium & Fine
SKH-36E	6¹/₂ x ¹/₂x⁷/₈	6	SSK-37D	⁵/₈ x³/₁₆ x¹/₄	Spiral (Rt. & Lt.)	Coarse, Medium & Fine

Quantity