Gauges

Protractor-Cum-Depth Gauges

* Graduated From 0 To 180 Degree In Opposite Directions
* Rule With Permanently Etched Graduations On Both Sides In Metric & Imperial
* The Rule Is Adjustable Throughout It's Length
* Spring Tension Nut Locks The Rule For Accurate Depth & Angle Measurements

CAT. NO.	LENGTH OF RULE		UNIT OF PACK (PIECES)
	INCHES	mm
DP-45	6	150	10

Quantity

Depth Gauges

* Steel Body With Top & Bottom Working Faces Accurately Ground
* Steel Rule Is Graduated On Both Sides ,One Side In Inches & Other In Metric
* Spring Tension LockNut For Easy Depth Measurement

CAT. NO.	LENGTH OF RULE		WIDTH OF RULE		UNIT OF PACK (PIECES)
CAT. NO.	INCHES	mm	INCHES	mm	UNIT OF PACK (PIECES)
SDG-104A	6	150	¹/₄	6.3	5
SDG-104B	12	300	¹/₄	6.3	5

Quantity

Surface Gauges -Toolmaker (Marking Blocks)

* The Steel Base Is Hardened & Ground
* Can Be Used On Flat Or Round Surfaces
* Spindle Adjustable To Any Angle - Above Or Below Base Level
* Two Gauge Pins In Base For Linear Works
* Having Fine Adjustment And Hard Scriber Point

CAT. NO.	SIZE OF BASE (LxWxH)		LENGTH OF SPINDLE
CAT. NO.	INCHES	mm	INCHES	mm
STG-94C	2³/₁₆ x 1⁵/₈ x³/₄	55 x 40 x 20	4 & 7	100 & 175
STG-94F	3¹/₈ x 2¹/₂ x 1	80 x 63 x 25	9 & 12	225 & 300
STG-94G	4¹/₈ x 3¹/₂ x 1¹/₈	105 x 88 x 28	12 & 18	300 & 450

Quantity

Surface Gauges - Adjustable

* Cast Iron Base Having Vee Groove In The Bottom
* Adjustable Spindle With Scriber That Can Be Rigidly Secured At Any Position On The Spindle
* Can Be Used On Flat Or Round Surfaces

CAT. NO.	SIZE OF BASE (LxWxH)	LENGTH OF SPINDLE
CAT. NO.	mm	INCHES	mm
SAG-92B	64 x 60 x 20	9	225
SAG-92C	72 x 67 x 22	12	300

Quantity

Screw Pitch Gauges

* Made From Hardened Steel
* Accurately Milled Gauges For Checking Internal & External Threads
* Pitch Size Stamped On Each Gauge
* Anyone OF The Gauges Can Be Securely Locked At The Desired Position By Locking Screw
* Enclosed In A Protective Steel Case

CAT. NO.	NO. OF BLADES	SCREW PITCH (RANGE)	DESCRIPTION
AN-31	31	4 - 42 TPI 4,4¹/₂,5,5¹/₂,6,7,8,9,10,11,12,13,14,15,16,18, 20,22,24,25,26,27,28,30,32,34,46,38,40,42	V-AMERICAN NATIONAL - 60�
AN-52	52	4 - 84 TPI AN-31 + 44 TO 84 IN STEP OF 2	V-AMERICAN NATIONAL - 60�
WW-MM	28 & 24	COMBINATION OF WHITWORTH & METRIC 4-62 TPI & 0.25 - 6.0 mm WHITWORTH SECTION : [4,4¹/₂,5,6,7,8,9,10,12,13,14,16,18,19, 20,22,24,25,26,29,30,32,36,40,48,60,62] & METRIC SECTION : [0.25,0.3,0.4,0.5,0.6,0.7,0.75,0.8,0.9,1.0, 1.25,1.5,1.75,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0]	WHITWORTH - 55� & METRIC - 60�

Quantity

Radius Gauges (Ring Type)

* Accurately Formed Blade For Checking Internal & External Radii
* Sizes Marked On Each Blade Of The Gauge
* Blade Of Gauges Locked In A Ring

CAT. NO.	MEASURING RANGE	NO. OF BLADES
RG-R5M	0.75mm TO 5mm (BY STEP OF 0.25mm)	18
RG-R13M	5.5mm TO 13mm (BY STEP OF 0.5mm)	16
RG-R14M	¹/₃₂" TO ¹/₄" (BY STEP OF ¹/₆₄")	15
RG-R12M	¹⁷/₆₄" TO ¹/₂" (BY STEP OF ¹/₆₄")	16

Quantity

Radius Gauges

(Concave And Convex Form)

* Accurately Formed Blades For Checking Internal & External Radii
* Blades Of Gauges Enclosed In A Protective Steel Case
* Provided With Steel Locking Screws
* Sizes Marked On Each Blade Of The Gauge

CAT. NO.	MEASURING RANGE	NO. OF BLADES
RG-C7M	1mm To 7mm BY STEPS OF 0.25 FROM 1mm TO 3mm BY STEPS OF 0.5 FROM 3.5mm TO 7mm	17 CONCAVE & 17 CONVEX
RG-C15M	7.5mm To 15mm (BY STEP OF 0.5mm)	16 CONCAVE & 16 CONVEX
RG-C25M	15.5mm To 25mm BY STEPS OF 0.5mm FROM 15.5mm TO 20mm BY STEPS OF 1mm FROM 21mm TO 25mm	15 CONCAVE & 15 CONVEX
RG-C14N	¹/₃₂" To ¹/₄" (BY STEPS OF ¹/₆₄")	15 CONCAVE & 15 CONVEX
RG-C12N	¹⁷/₆₄" To ¹/₂" (BY STEPS OF ¹/₆₄")	16 CONCAVE & 16 CONVEX

Quantity

Feeler (Thickness) Gauges

* The Gauge Blades Are Made From High Grade Tool Steel
* Hardened ,Tempered And Polished To Precision Accuracy
* Tapered Blades Marked With Their Thickness Sizes
* Blades Of Gauges Enclosed In A Protective Stainless Steel Case
* Available In Metric And Inch Sizes
METRIC

CAT. NO.	LENGTH mm	NO. OF BLADES	RANGE mm	BLADE THICKNESS 1/100mm
FG-9M	100	9	0.05-0.6	5,10,15,20,25,30,40,50 & 60
FG-13M	100	13	0.05-1.0	5,10,15,20,25,30,40,50, 60,70,80,90 & 100
FG-20M	100	20	0.05-1.0	5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95 & 100
FG-26M	100	26	0.03-1.0	3,4,5,6,7,8,9,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80, 85,90,95 & 100

INCHES

CAT. NO.	LENGTH mm	NO. OF BLADES	RANGE mm	BLADE THICKNESS 1/100mm
FG-9M	3¹/₂	9	0.0015-0.015	1.5,2,3,4,6,8,10,12 & 15
FG-15M	3¹/₂	15	0.002-0.025	2,3,4,5,6,8,10,12,13,15,18,19,20,22 & 25
FG-26M	3¹/₂	26	0.0015-0.025	1.5,2,2.5,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20, 21,22,23,24 & 25

Quantity